RS AUDIO DPA-300-USB 300W Mixer Anfi USB 5 Kanal 100V

DPA-200USBaDPA-200USBa
DPA-200USBbDPA-200USBb
DPA-200USBcDPA-200USBc

RS AUDIO DPA-300-USB 300W Mixer Anfi USB 5 Kanal 100V

$535.00 + KDV

300W Mixer Amplifier Built-in USB Input, 5 Inputs (3xMIC 1/4″ Phone Jack / 2xAUX Input with DUAL RCA / 1xEMC Input 1/4″ Phone Jack / EMC1 has Priority for All Inputs except MIC1)  –  70V / 100V / 4-16 Ohm Line Out

Model DPA 300
RMS 300W
Speaker Outputs 4-16Ω, 70V and 100V
Input Mic1(1/4” phone jack) and Mic 2-3
(XLR type with 48V phantom power)
5mV/600 ohms, balanced
AUX1 and 2: 250mV/15k ohms, Unbal.
EMC1 and 2: 250mV/15k ohms, Unbal.
Tone Bass±10dB at 100Hz
Treble±10dB at 10KHz
Frequency Response 50Hz – 15KHz(±2dB)
S/N Ratio MIC1, 2 and 3: 66dB; AUX1and 2: 80 dB
THD Less than 1% at 1kHz, 1/3 rated power
Crosstalk MIC: 80dB; AUX: 85dB
Priority MIC1 overrides other input signals
with 0-30 dB attenuation
EMC1 overrides all inputs except MIC1
Control Individual gain controls, power switch,
master volume
Indicator Power LED, LED level meter, protect
Protection AC fuse, short-circuit, overload and
high temperature
Power Supply 110V/60Hz or 230V/50Hz,
DC 24V input available at request
Power Consumption 400W
Weight (kg) 17.3
Dimensions (W×D×H) 484×435×132mm
Finish Panel: aluminum plate, black
Case: steel plate, black

Ürün satın al

Stok Kodu: DPA-300-USB Kategoriler: , , , , ,
  • Açıklama
  • Ek Bilgi
  • Teknik Özellikler

Ürün Açıklaması

300W Mixer Amplifier Built-in USB Input, 5 Inputs (3xMIC 1/4″ Phone Jack / 2xAUX Input with DUAL RCA / 1xEMC Input 1/4″ Phone Jack / EMC1 has Priority for All Inputs except MIC1)  –  70V / 100V / 4-16 Ohm Line Out

 

Model DPA 300
RMS 300W
Speaker Outputs 4-16Ω, 70V and 100V
Input Mic1(1/4” phone jack) and Mic 2-3
(XLR type with 48V phantom power)
5mV/600 ohms, balanced
AUX1 and 2: 250mV/15k ohms, Unbal.
EMC1 and 2: 250mV/15k ohms, Unbal.
Tone Bass±10dB at 100Hz
Treble±10dB at 10KHz
Frequency Response 50Hz – 15KHz(±2dB)
S/N Ratio MIC1, 2 and 3: 66dB; AUX1and 2: 80 dB
THD Less than 1% at 1kHz, 1/3 rated power
Crosstalk MIC: 80dB; AUX: 85dB
Priority MIC1 overrides other input signals
with 0-30 dB attenuation
EMC1 overrides all inputs except MIC1
Control Individual gain controls, power switch,
master volume
Indicator Power LED, LED level meter, protect
Protection AC fuse, short-circuit, overload and
high temperature
Power Supply 110V/60Hz or 230V/50Hz,
DC 24V input available at request
Power Consumption 400W
Weight (kg) 17.3
Dimensions (W×D×H) 484×435×132mm
Finish Panel: aluminum plate, black
Case: steel plate, black

Ek Bilgi

Ağırlık 17.3 kg
Boyutlar 48 x 44 x 13 cm

This series mixer amplifier are featured for its Mic2-3 of XLR balanced
microphone inputs with phantom power
DPA’s series of public address mixer amplifiers have power ratings
from 100 to 500 watts and feature 3 balanced microphone inputs, 2
AUX level inputs and EMC (priority) level inputs.
Priority muting is achieved via MIC 1 and EMC 1 for overriding music
for paging and emergency alarms. Individual gain controls are
provided for MIC and AUX inputs, Bass and treble controls and master
volume control are provided for overall tone control. 4~16Ω, 70V and
100V speaker outputs are provided. Extensive protection from
short-circuit, clip, overload and over-temperature.
Features:
* Three microphone inputs, Mic1, 1/4" phone jack, Mic2-3, XLR
balanced input with 48V phantom power
* Two Aux inputs, dual RCA
* Two EMC priority inputs, 1/4" phone jack
* EMC input to receive override signal from voice alarm system
* EMC1 has priority over all inputs except MIC1
* Individual volume controls for Mic1-3 and Aux1-2
* Bass, treble and master volume control
* Short-circuit, clip, overload and over-temperature protection
* Power, output level meter, protection LED indicator
* 4~16 Ω, 70V and speaker outputs
Optional
* With 24V DC input
* Tabletop design
* Faults Monitoring module, it can output short circuit signal to
achievec main/spare amplifier switch